Carnage Night Event Details :
January 20th 2024, March 9th 2024, June 1st 2024, September 14th 2024, & December 7th
Spectators Entrance - Front Gate
The Grandstands (Entrance located on HWY 41)
Gate 1: CASH ONLY
Gate 2: Prepaid Tickets ONLY
Gate opens 4:30 PM
Smashing begins 6:30 PM
General Admission: $20.00
Veterans and Active Service Members: $17.00 (must have ID)
Seniors (60+): $17.00
Kids 17 and under: $10.00
Kids 6 and Under: FREE
The Pits - Drivers Get In Free
Friday before event: Parking Only
Gates open 8 AM -9 PM
Saturday / Night of Carnage:
Pit Passes - $40 (Ages 0 - 100)
*ALL MINORS (17 and under) must have a completed Minor Consent Form before entering the Pits!
Motorized Vehicles including but not limited to scooters, bikes, four wheelers, & golf carts in pits: $5
Personal Vehicles in Pits (not including haulers): $20
Parking Opens 8AM
Pit Gate/ Registration Opens at 2:00PM
Safety Tech Opens At 2:00 PM
Drivers Meeting At 5:00PM
Parade Lap 6:15 PM
Smashing Begins At 6:30 PM
*SCHEDULE, PRICING, AND START TIMES ARE SUBJECT TO CHANGE*
January 20th 2024, March 9th 2024, June 1st 2024, September 14th 2024, & December 7th
Spectators Entrance - Front Gate
The Grandstands (Entrance located on HWY 41)
Gate 1: CASH ONLY
Gate 2: Prepaid Tickets ONLY
Gate opens 4:30 PM
Smashing begins 6:30 PM
General Admission: $20.00
Veterans and Active Service Members: $17.00 (must have ID)
Seniors (60+): $17.00
Kids 17 and under: $10.00
Kids 6 and Under: FREE
The Pits - Drivers Get In Free
Friday before event: Parking Only
Gates open 8 AM -9 PM
Saturday / Night of Carnage:
Pit Passes - $40 (Ages 0 - 100)
*ALL MINORS (17 and under) must have a completed Minor Consent Form before entering the Pits!
Motorized Vehicles including but not limited to scooters, bikes, four wheelers, & golf carts in pits: $5
Personal Vehicles in Pits (not including haulers): $20
Parking Opens 8AM
Pit Gate/ Registration Opens at 2:00PM
Safety Tech Opens At 2:00 PM
Drivers Meeting At 5:00PM
Parade Lap 6:15 PM
Smashing Begins At 6:30 PM
*SCHEDULE, PRICING, AND START TIMES ARE SUBJECT TO CHANGE*
2024 Bring on the Carnage Rules.
General Rules
***no phones or communication devices in car***
- Must be at least 18 years of age to drive.
- Officials reserve the right to approve or reject any entry
- No drinking in the pits before and during the event. Any driver or crew that is caught drinking or under the influence of drugs or alcohol will be immediately disqualified and escorted out of the pit area. There will be ZERO tolerance for this.
- Any Driver or crew member disobeying the rules will cause his or her car to be disqualified
- Unsportsmanlike conduct will not be tolerated and will be grounds for disqualification and barring from future derbies. Drivers are responsible for the actions of their crew members.
- Drivers and crew are responsible for any damages caused by their negligence on the track or in the pit area.
- Reckless driving in the pit area will result in disqualification.
- All cars must register prior to start time.
- Must have a full face helmet which will remain on at all times when you are on the track.
- Fire Suits are required.
- Fire extinguishers are required!
- In case of a fire, please wait for the red lights to come on to stop the cars to make a safe exit.
- Drivers must remain in their vehicles throughout the event until the checkered flag.
- All glass, chrome, plastic and molding must be removed from the car. (Windshield can stay unless broken or bunch of cracks in windshield)
- Carpet and Back Seats must be removed.
- All wheel weights must be removed.
- Auto must be swept clean. No junk tires, wheels, metal parts, broken glass, etc. allowed in the car. You will not be allowed on the track.
- All drivers and crews are responsible for picking up trash, automobile parts, scrap metal, tires, etc. from their car.
- Must wear seat belt at all times while on the track.
- Must have Large numbers (Clear) on the roof and both sides of the car.
- No vulgar writing on cars – No drug terminology writing on cars.
- Driver’s door bar is recommended.
- 2 holes must be cut in the hood 6” X 5”.
- No hitting car in Driver’s door in any and all events.
2024 Rules
***no phones or communication devices in car***
4 CYL & 6 CYL DEMOLTION DERBY
Prep car as in GENERAL RULES
Type of car – 1980 and up
Any compact or mid size, front wheel drive car, FWD Mini Van, or station wagon with 4 or 6 cylinder and you may run RWD cars. No full size cars.
No Four wheel drive or all-wheel drive cars
Gas Tank
Gas tanks may be moved to back seat area. Must be securely fastened by straps, bolts or a gas tank protector. Lines must be double clamped or use the factory connectors.
If the gas tank is in front of the rear axle it may be left in the stock location. A gas tank protector is strongly recommended. Gas tank protector can be up to 1/8 inch plate. Plate can be bolted to the floorboard of the car.
Gas tank protector may not strengthen the car in any way.
Gas tank protectors are allowed inside of the car. They cannot support or be tied into the frame of the car or support the doors of the car in any way.
You can move the filler neck from stock location to inside of the car. Must be securely fastened.
If a car is leaking or spilling gas in any way the car will be disqualified from the event.
Rear Suspensions
Front Suspension
Front struts can be braced
You can weld the A arm of the car to set the height of the car (No reinforcing the frame or reinforcing the A arm.)
Tie rods may not be reinforced, no aftermarket tie rod ends will be allowed.
Doors
All doors may be welded with flat bar no longer than ¼” thick x 3 inches wide.
6 Plates per door 4 inches max length
Door may be wired or chained.
Trunk
Trunk seams may be welded with a strap no larger than ¼” thick x 3 inches wide.
6 Plates allowed on the trunk 4 inches length.
Trunk may be pre bent or tucked
Cage
A cage is highly recommended. It must consist of a driver’s door bar and a passenger door bar, bars no smaller than 4 inch wide and no larger than 12 inches wide. You must run a front and rear bar from door bar to door bar. It must be no smaller than 2 inches and no larger than 6 inches. If you have down bars off of your age they must be welded to sheet metal only. You may tie the driver’s side door bar to the frame or unibody (driver’s side only). It must be straight off of the door bar to the frame or unibody.
Rollover bars are permitted. Can be welded to cage. Cannot be welded to the frame.
Kickers are not allowed in this class. No bracing or additional metal welded to the cage in this class.
Hood and Core Support
Core support may be bolted with all thread rod no larger than 7/8”. You can run it all the way from the frame through the hood.
Wire, chain or bolt the hood down in 6 spots. The all thread through the hood count as (2).
A hole must be in the hood for fire detection.
Battery
One battery of any size is permitted in the front passenger floor board.
Battery must be secured and covered.
Tires
Any tire size is permitted; any ply must be dot
No studded tires; no screws in rims.
Valve stem protectors are allowed.
No steel plate tire protectors over tires or attached to the rims
Radiator
Radiator must remain in the stock position.
Stock overflow only
Bumpers
Any passenger car bumper may be used
Bumpers cannot be wider than the car or fenders. (Measurement will be based off of the narrowest width part of the car.)
You may put a piece of pipe or tube steel in the frame, one on each side of frame, to weld to the bumper. This is to replace the bumper shock and attach bumper. The pipe or tube steel cannot exceed 12 inches long from the front of the factory frame. Don’t bend this rule.
You can weld an 8” x8” X1/2” thick plate to the end of the frame to mount the bumper to. You can bolt or weld the bumper to the plates
Windshield
If windshield is good can be left in, if it has cracks or you want to take it out you must have at least two bars from roof to cowl panel.
Body Mounts
Body mounts must remain stock
Body
No additional / extra metal can be added to the body of the car.
Fender and quarter panels can be bolted. No additional metal may be added. Bolts can only be bolted to the sheet metal of the car.
Frame
No reinforcement to the frame or unibody.
Frame and unibody must remain stock. The exception to this rule is the mounting pipes or tube steel that can extend 12 inches into the frame to attach to the bumper.
Engine & Transmission
Engine and Transmission mounts can be welded chained or bolted solid.
Roof Sign
Cars can have a 2 ft. by 2 ft. roof sign with the car number on it. Must be bright paint or bright stickers.
Roof signs must be securely fastened to the car in such a way as to ensure it does not become detached.
Car numbers must be clear and big on roof and both sides of car.
TRAILER RACE
- Prep car as in GENERAL RULES
- Boat *MUST NOW BE ON A FULL TRAILER* [NOTHING CAN BE DRAGGING]
- You Must have 2 feet of your boat left to complete the event and collect prize money
- May use kayaks or canoes but must meet length rule.
- It’s a Trailer Race with boats, campers and Jet Skis.
- Minimum trailer length overall 10 feet.
- Trailers with advertising signs permitted.
- Utility style trailers OKAY.
- Boats must be cleaned out before going out on the track
- Boats must have the car number on it
- If anything on the car or attached to the car starts damaging the track the car will be DQ’d
- Jack handles on trailers must be removed
- All drivers need to wear glasses and or face shields
- All glass must be removed from boat
- No cutting boats
- For small cars boat must be at least 8’ or larger for larger car 10’ or larger. Minimum trailer length overall 10 feet.
- Seat belts must be worn before getting on the track
- Stay in your vehicle unless an official tells you otherwise
- Chain must be no longer than 5 feet
CHAIN RACE (2 chains mandatory)
- Prep car as in GENERAL RULES
- Chain must be a minimal length of 5 feet, Mandatory 2 Chains Per Connection, minimum distance separating chains 3 feet.
- If chain breaks cars are done, you must pull off into a safe area on the track you will no longer be scored for the event.
- If you do not pull off, you may be disqualified from the rest of the events.
- Number on car must be clear and big
- Seat belts must always be worn.
- You must remain in your vehicle unless an official tells you otherwise.
- Second cars engine needs to be off and remain off throughout the event – Your team will be disqualified if 2nd car is running at any time through the race.
- You must stay in your vehicle throughout the event.
- Prep car as in GENERAL RULES
- Car must go around the flagpole on the first lap and every other lap of the race or car will not be scored.
- Cars must come into the flagpole at a safe rate of speed so not to hit other drivers in the driver’s door
- Car numbers must be clear and big
- Seat belts must always be worn
- You must remain in your vehicle unless an official tells you otherwise.
- Push Car Race permitted cars: Enduro, Mini Stock, Ford Outlaw, Demo Cars, are the only cars that will be permitted to push.
- Pushee (one being pushed): No running engine, can be anyone of the permitted cars listed above. If the car has an engine, battery must be removed.
- Transponder will be attached to Pushee Car.
- Not a demolition derby, its a RACE!! No intentional blocking of Pushee.
SCHOOL BUS RULES
Safety Rules (MANDATORY)
- The Citrus County Speedway officials will inspect all buses before competing. No truck chassis buses. Must be bus chassis. All buses must be safety inspected before they race. If and when deemed necessary, officials shall have the authority to insist upon a physical eye examination or field sobriety test of any participant.
- NO bus shall have any passengers and/or riders at any time NO EXCEPTIONS!
- Racing helmet with min. Snell 2015 rating. Neck brace recommended.
- Fire suit with SFI min. Rating of "1". No holes allowed in fire suit.
- Fire resistant racing gloves and racing shoes must always be worn while on track. No Mechanix type gloves will be permitted.
- A single, quick release, 5-point harness (minimum 3-inch belts) dated 2016 or newer is required in all buses. All belts and installation must be approved by the track officials. All required belts and safety equipment must always be in use while on the track.
- Aluminum racing seats mandatory and must be mounted securely in stock location with bracing and support of the bottom, back and head rest of seat. Seat belts must be attached to same fixture seat is mounted on and must be through bolted with minimum of (4)-1/2 " bolts and 4"x4" x1/4" steel plates for each bolt on underside of floor if mounted to floor. No lag bolts.
- All buses must have a fire extinguisher (minimum 2 lbs.) securely mounted within easy reach of driver. The mounting must be in such a way that the driver can quickly remove it from its mount. Wrapping duct tape around the extinguisher or any other material that will prohibit that easy removal of the extinguisher is not acceptable. All extinguishers MUST be fully charged and have a working gauge before bus will be allowed on the track.
Bus Body
- C type passenger buses only. Must be minimum of 24 foot long.
- 8.00/20 minimum tire size.
- Center Steering allowed, Relocation of pedals allowed.
- Turbo diesel engines allowed, Tuning is allowed.
- Windshield minimum of 4, 1 inch bar Infront of driver area, along with expanded metal type screening, minimum 1/2 windshield coverage Infront of driver.
- All breaks must be in good, working condition.
- Body and interior must remain completely intact. Seats may be removed or secured. Headlights and taillights must be removed. All body side trim/molding must be removed.
- All Vehicle glass must be removed except windshield. Windshields may be removed but MUST be replaced with approved metal screen ¼” mesh or smaller, minimum 1/8-inch-thick or Lexan. Remove all headlights, taillights and body moldings.
- Emergency door must be completely removed. Front door and hand lever may be removed or chained shut. Front doors that remain must have an opening in the bottom of the door to gain access if needed.
- OEM suspension components only. No suspension altering devices.
- Gas tanks may be relocated. Fuel Cell or marine gas tank is recommended. Must be securely fastened with a minimum of two 1"x1/8"steel straps from front to back and side to side. Steel firewall must separate drivers from fuel tank area. Absolutely NO plumbers strap!!!
- Batteries may be relocated but must be securely mounted with steel straps from front to back and side to side. No plumbers strap.
- A minimum 4-point roll bar constructed of 1 3/4" .095 wall steel tubing minimum with up right halo and 2 rearward braces. Must be mounted on 4"x4"x1/4" steel plates and through bolted to floor. No lag bolts. No square tubing or galvanized pipe allowed. 6" C-channel 6' long centered and mounted on the left side of the bus with four 1/2" bolts evenly spaced approximately mid-torso while in the seated position is highly recommended.
- Nothing may be painted on the car which might be considered offensive. All cars will be screened before entry to the track surface and buses not conforming shall not compete.
- All modifications not covered in these rules will not be allowed unless approved by tech.
- Decisions of the officials are final in all cases.
GROCERY GETTER ENDURO RULES – 2024
***no phones or communication devices in car***
- ANY INLINE 4 CYLINDER, V4, or V6 CAR that is fwd or rwd.
- CAR MUST BE 100% BONE STOCK! ABSOLUTELY NO EXCEPTIONS! NO TURBOS, SUPERCHARGERS OR PROCHARGERS OF ANY KIND.
- ALL AIR BAGS, GLASS, CHROME, PLASTIC, AND MOLDING MUST BE REMOVED!
- MAY LEAVE WINDSHIELD IN IT. IF YOU REMOVE WINDSHIELD, YOU MUST REPLACE IT WITH 1/2" METAL HARDWARE CLOTH/ WIRE OR LEXAN!
- MAY REMOVE AND REPLACE CATALYTIC CONVERTER WITH EXHAUST PIPE. REMAINING EXHAUST MUST BE FACTORY DIAMETER AND EXTEND BEHIND REAR TIRES
- CARPET AND BACKSEAT MUST BE REMOVED.
- ALL WHEEL WEIGHTS MUST BE REMOVED. FACTORY SIZE WHEELS AND TIRES.
- VEHICLE MUST BE SWEPT CLEAN. NO JUNK TIRES, TIRES, WHEELS, METAL PARTS, BROKEN GLASS, ETC.
- YOU MUST ALWAYS WEAR A SEAT BELT!
- DRIVERS DOOR BAR IS MANDATORY. ALL DOORS MUST BE CHAINED OR WELDED SHUT. All cars without steel exterior bodies must construct door bar in fashion similar to diagram. 1-1/2" minimum diameter tubing. all other cars may choose to attach 3" or larger "c" channel midway of the drivers door. must extend from behind front tire to just in front of rear tire. channel must be welded and bolted for the entire length of the car.
- RACING SEAT, BELTS, AND 4-POINT CAGE IS RECOMMENDED! ABSOLUTELY NO PIPE BUMBERS!
- FIRE SUITS ARE REQUIRED. FULL FACE HELMET IS REQUIRED. GLOVES AND RACING SHOES ARE REQUIRED!
- FIRE EXTINGUISHERS WITH A WORKING GAUGE ARE MANDATORY!
- MUST BRING A COPY OF OWNERS MANUAL WITH YOU.
- PLEASE REFER TO GENERAL RULES IN BRING ON TO CARNAGE FOR ADDITIONAL RULES.
ALL RACES WILL BE RAN LIKE THE OLD DAYS.
THE 60 LAP FEATURES WILL BE 20 LAPS - NORMAL, 20 LAPS - THE WRONG WAY, AND 20 LAPS - CHICANE
THE GROCERY GETTER 150 WILL BE 50 LAPS - NORMAL, 50 LAPS - THE WRONG WAY, AND 50 LAPS - CHICANE